卷扬机 - 河南克鲁德重工有限公司

Product Introduction: The QP Series winch-type single-lift gate operator is a type of hydraulic machinery used to open and close plane gates in water conservancy and hydropower projects. The main models include QP1×50, QP1×80, QP1×100, QP1×125, QP1×160, QP1×250, QP1×400, QP1×630, QP1×800, QP1×1000, QP1×1250, QP1×1600, and others, utilizing…

Product Introduction: The QP Series Winch-Type Dual-Lifting-Point Gate Operator is a type of hydraulic machinery used to open and close plane gates in water conservancy and hydropower projects. The main models include QP2×50, QP2×80, QP2×100, QP2×125, QP2×160, QP2×250, QP2×400, QP2×630, QP2×800, QP2×1000, QP2×1250, QP2×1600, and others, utilizing…

QPK Series Single-Lifting-Point Rapid Winch Gate Operator—Operating force: 50–1,600 kN; speed regulator controls rapid gate closure; manual and electric operation; suitable for operating rapid emergency gates in water conservancy projects. Krude Heavy Industry.

QPK Series Rapid Hoist Double-Lifting-Point Gate Operators—Operating force: 50–1,600 kN; dual-lifting-point synchronous drive with manual and electric operation; suitable for opening and closing horizontal rapid gates in water conservancy projects and for emergency flood control gate closures. Krude Heavy Industry.

Krude Heavy Industry JKL Manual Quick-Release Winch Series (JKL2–JKL10): Full range of specifications and prices. Suitable for bridge and wharf pile driving and drilling; custom solutions available.

JK-D Series Single-Shaft Winches (JK0.75D–JK2.0D) feature a planetary gear train with a small tooth difference and a single-shaft coaxial design, with a rated pulling force of 7.5–20 kN and a speed of 28–46 m/min. This article provides a detailed explanation of specifications, technical parameter tables, application scenarios (replacement of older equipment, space-constrained environments, and small-to-medium-sized companies), and FAQs. Directly supplied by Henan Keluode Heavy Industry.

JM Series Electronically Controlled Slow-Speed Winches (JM1–JM65), with rated pulling forces of 10–650 kN and speeds of 9.5–16 m/min, feature gear reducer drive and are suitable for precision installation and positioning. This article provides a detailed explanation of specifications and models, technical parameter tables (including two tables: JM1–JM8 and JM10–JM65), application scenarios, and FAQs. Directly supplied by Henan Keluode Heavy Industry.

JMM Series High-Capacity Friction Winches (JMM10–JMM55), with a rated pulling force of 100–550 kN and a maximum rope capacity of 4,800 m, feature a friction-driven system that maintains a constant wire rope speed (5–11 m/min). This article provides a detailed explanation of specifications, technical parameter tables, application scenarios (bridge construction, port terminals, and heavy equipment installation), and common FAQs. Directly supplied by Henan Krude Heavy Industry.

The JK-type electronically controlled high-speed winch, also known as an electric high-speed hoist, is available in models ranging from JK0.5 to JK10, covering a load capacity of 5 to 100 kN, with wire rope speeds of 22 to 30 m/min and a wire rope capacity of 100 to 300 m (optional). This article provides a detailed explanation of specifications and models, technical parameter tables, a selection guide (outlining which operating conditions each model is suitable for), component breakdown, and common FAQs. Henan Keluode Heavy Industry offers custom solutions for non-standard specifications.